PLE-2CS
New product
The Plena two-zone call station is a modern, high-quality call station with a stable metal base design, a flexible microphone stem and a unidirectional condenser microphone. It can make calls to selected zones in a public address system built with the PLE series two-zone mixer and mixer amplifiers. In addition to tabletop use, the Plena design allows neat flush-mounting in desktops.
This product is no longer in stock
Availability date:
Gain, speech filter and intelligibility
This call station features selectable gain, a selectable speech filter, and a limiter for improved intelligibility.
Range
The call station has a balanced line level output, giving it a maximum range of 200 meters from the mixer, when using CAT-5 extension cables.
Loop-through
With the loop-through RJ-45 connector, it is possible to daisy chain multiple call stations.
Priority
The priority is automatic i.e. the call station nearest the mixer has priority and can override a call station further from the mixer. When a call is being made by a higher priority call station, a yellow light will display on the lower priority call stations.
Dip switches and status
DIP switches at the base of the call station select different microphone gain levels, chimes, and the speech filter. A service accessible rotary control provides microphone level attenuation. LEDs on the call station show which zones have been selected. An additional LED give visible feedback on the active state of the microphone and the system:
Voltage range | 24 VDC supplied by PLE mixer amplifier or mixer |
Current consumption | <30 mA |
Frequency response | 100 Hz to 16 kHz |
Output impedance | 200 ohm |
Chimes | 6 |
Base dimensions (H x W x D) without microphone | 40 x 100 x 235 mm |
Cable length | 5.0 M |
Weight | Approx. 1 kg |
No customer reviews for the moment.