QSC MP-A80V, 8CH Hi-Z/Low-Z Multi-Channel Amplifier with FlexAmp technology

MP-A80V

New product

QSC MP-A80V is an 8-channel amplifier and is part of the MP-A Series of commercial music and paging amplifiers with a low total cost. With Class-D output circuitry and switch mode power supply for high efficiency. FlexAmp Technology allows delivery of up to 400 Watts of total power in any ratio. It also has power-saving features including auto-standby and remote standby input.

QSC2.JPG

More details

Please enter your suburb and postcode

Shipping Rates

More info

QSC MP-A80V is part of the MP-A Series of multi-channel amplifiers offered by QSC.

Aside from having a 1RU amplifier design for rack space savings. The 1RU chassis means that the MP-A Series amplifiers are perfect for installations with rack space restrictions.

It utilises Class-D output circuitry and switch-mode power supply for high efficiency and low cost of ownership making it efficient in power and space utilisation.

Another feature is its seamless Standby mode when not in use for 28 minutes and auto-ramp circuitry that ensures quiet and fast power up from Standby when a signal is present.

This combination Class-D output topology and energy-saving circuitry make this amplifier very suitable for music and paging applications.

With a FlexAmp Technology that maximises each pair of amplifier channels to deliver up to 400 W total power, in any ratio.

Its rear panel offers 2 x 3-pin Euroblock inputs, 1 x 4-pin Euroblock output, and a single 5-pin Euroblock remote input for putting the amplifier into standby mode for fire safety systems and an amplifier status signal on the remote output for system verification.

It also has an 80 Hz high-pass filter per channel and ships with Euroblock connectors, cable ties, and a power cord.

A load selector for driving 4 Ω, 8 Ω, 70 VA or 100 V on each channel is also part of its design.

Amp status remote output also makes it part of the legacy of rock-solid QSC amplifier dependability.

Specifications MP-A80V

Channels: 8

Power: (all channels driven)
         8 Ω: 200 W
         4 Ω: 200 W
         70 V: 200 W
         100 V: 200 W

FlexAmp Technology: Allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio

Frequency response at 8 Ω: 20 Hz – 20 kHz +/- 0.5 dB

Signal to Noise: > 103 dB

Input sensitivity: 1.23 V (+4 dBu)

Gain at 8 Ω: 30.0 dB

Output circuitry: Class D

Input impedance: >10k, balanced or unbalanced

Maximum input level: 12.3 V (+24 dBu)

Cooling:
       Type: Forced air cooling, thermally regulated fan speed, side/rear-to-front airflow
       Operating temperature range: Maximum: -10° - 50° C, recommended: 0° - 35° C, reduced performance above 40° C

Connectors:

       Input connectors: Eight 3.5mm Euro, 3-pin (green)

       Remote connectors: One 3.5mm Euro, 5-pin (black)

       Output connectors: Four 5.0mm Euro, 4-pin (green)

Front panel indicators: Power, signal (per channel), limit / mute / protect (per channel)

Rear panel indicators: Bi-Color LED signal / limit/ mute/ protect 

User-configurable operating modes (per channel): DIP switch selectable, low impedance 4 Ω or 8 Ω, high impedance direct drive 70 V or 100 V

Remote I/O: Remote standby, amplifier status enunciation on 3.5 mm connectors

Highpass filter: 80 Hz DIP switch engaged per channel

Dimensions: 1.75 in x 19 in x 14.8 in (44 mm x 483 mm x 377 mm)

Net weight: 12.8 lb (5.8 kg)

Shipping weight: 17.4 lb (7.9 kg)

Power requirements: Universal power supply (with active power factor correction), 100 – 240 VAC, 50 -60 Hz

Agency approvals: UL, CE, RoHS/WEEE compliant, FCC class B (conducted and radiated emissions)

Carton contents: IEC cable, quick start guide, connector pack

Reviews

No customer reviews for the moment.

Write a review

QSC MP-A80V, 8CH Hi-Z/Low-Z Multi-Channel Amplifier with FlexAmp technology

QSC MP-A80V, 8CH Hi-Z/Low-Z Multi-Channel Amplifier with FlexAmp technology

QSC MP-A80V is an 8-channel amplifier and is part of the MP-A Series of commercial music and paging amplifiers with a low total cost. With Class-D output circuitry and switch mode power supply for high efficiency. FlexAmp Technology allows delivery of up to 400 Watts of total power in any ratio. It also has power-saving features including auto-standby and remote standby input.

QSC2.JPG

Accessories

Download