The Plena voice alarm remote control panel kit is a functional match to the LBB 1997/00, which duplicates the voice alarm router. All controls and indicators are available on screw terminals. Plena voice alarm remote control panels allow the system to be controlled remotely from one or two remote locations.
This product is no longer in stock
There are five models of remote control kits available:
These kits make it easy to build a custom control unit. The electrical connections are printed on the front and rear panels. A 24 VDC output is available to supply power to external LEDs and relays, so an external power supply is not required for that purpose.
The remote control kit functions on an external 24 V power supply. The interconnecting CAT 5 (shielded) cable provides power for the RC extension and extension kit.
After connecting all indicators the following functions are available:
The connection to the Bosch Voice Alarm System is via standard, shielded CAT‑5 cable and RJ45 connectors. The included rack mounting brackets can also be used to mount the units to a rear wall with spacing for cables, and even to a flat surface above or below the units.
|Voltage||24 VDC, +15% / -15%|
|Current typical||50 mA|
|Current max (indicator test)||200 mA|
|Priority relay contacts||30 V, 1 A|
|Emergency relay contacts||30 V, 1 A|
|DC supply output||24 V, 200 mA (max)|
|LEDs / lamps|
|On external power||50 V (200 mA max)|
|On internal power||5 mA max|
|Type||Open collector pull down|
|Dimensions (H x W x D)||88 x 430 x 90 mm(19 in wide, 2U high)|
|Weight||Approx. 2 kg|
|Mounting||Stand-alone, 19” rack|
No customer reviews for the moment.