LBB1996/00
New product
The Plena VAS remote control panels allow remote control of the system from one or two remote locations. This main RC unit duplicates the front panel of the Voice Alarm Controller.
This product is no longer in stock
Availability date:
The kits are a functional match to the remote control and the RC extension, with connectors on the front panel instead of controls and indicators. There are five models available:
The remote control is an exact duplicate of the control panel on the LLB 1990/00 Plena Voice Alarm System Controller. The LBB 1996/00 provides all EVAC control from one or two locations, such as at entrance points. The remote control has BGM and emergency-call zone selection without source, volume or tone control.
It is possible to enter or acknowledge the emergency state, and acknowledge and reset the fault state. Emergency or alert messages can be started, and live calls can be made.
An LED meter shows the presence and level of the calls that are running in the system. The fault indicators reflect any faults present in the system. The unit connects to the Plena Voice Alarm System via standard shielded CAT 5 cable. The included rack mounting brackets can also mount the unit on a wall with spacing for cables at the back, as well as to a horizontal surface above or below the unit.
Voltage | 24 VDC, +15% / -15% |
Current typical | 100 mA |
Current max (indicator test) | 250 mA |
Relay contacts | 30 V, 1 A |
Dimensions (H x W x D) | 134 x 430 x 90 mm(19" wide, 3U high) |
Weight | Approx. 3 kg |
Mounting | 19” rack or wall |
Color | Charcoal |
Operating temperature | -10 ºC to +55 ºC (14 ºF to +131 ºF) |
No customer reviews for the moment.