The Plena voice alarm remote control panels allow the system to be controlled remotely from one or two remote locations. The kits are a functional match to the remote control and the RC extension, with connectors on the front panel instead of controls and indicators.
This product is no longer in stock
There are five models available:
The fireman’s panel is a remote control that has specialized buttons and indicators for firemen. The remote control has no zone selection, as the standard RC has, but large backlit buttons.
It is possible to enter or acknowledge the emergency state, and acknowledge and reset the fault state. Emergency or alert messages can be started, and live calls can be made.
An LED meter shows the presence and level of the calls that are active in the system. The fault indicators show detailed information of a fault in the system. Connection to the Plena Voice Alarm System is via standard, shielded CAT‑5 cable and RJ45 connectors. The included rack mounting brackets can also be used to mount the units to a rear wall with spacing for cables, and even to a flat surface above or below the unit.
|Voltage||24 VDC, +20% / -10%|
|Current typical||100 mA|
|Current max (indicator test)||250 mA|
|Priority relay contacts||30 V, 1 A|
|Emergency relay contacts||30 V, 1 A|
|Dimensions||134 x 430 x 90 mm(19" wide, 3U high)|
|Weight||Approx. 3 kg|
|Mounting||19” rack or wall|
|Operating temperature||-10 ºC to +55 ºC (14 ºF to +131 ºF)|
|Storage temperature||-40 ºC to +70 ºC (-40 ºF to +158 ºF)|
No customer reviews for the moment.