Bosch 120W Mixer Amplifier is a high performance, professional public address mixer amplifier all-in-one with modern state of the art features. Easy to use, perfect for any function or commercial music system. Backed with a 3 year warranty, Bosch provide a good quality product from German engineering standards. Any restaurant would be over the moon with the quality.
This product is no longer in stock
Providing a crisp call or clear music is as easy as turning on the radio. The PLE-2MA120 Plena 120W Mixer Amplifier is also surprisingly affordable, without sacrificing features such as ducking, priority and flexibility.
Microphone and line inputs
All Mic/line inputs can be switched between microphone level and line level sensitivity. The inputs are balanced but can be used unbalanced. Phantom power can be switched on to provide power to condenser microphones.
Separate music inputs are available with their own input selector and volume control. The user can choose a music source like a CD player or radio (like the PLN-DVDT), and set the level of music.
More unique features are available such as detachable labels where the user can write the names for inputs, music sources and zones. These labels can then be mounted on the front, protected by the clear window.
The unique tone controls provide separate control for mic/line inputs and music inputs so that the voice on the microphones can be specifically optimized for excellent speech or singing. Correspondingly, the tone controls for background music provide the most appropriate music reproduction.
These Plena mixer amplifiers come in 120 and 240 Watts output power. This power is directly available on 100 V constant voltage connections and on a low impedance connection for an 8 ohm load. Moreover, the amplifiers have a separate 100 V call-only output channel for addressing areas where only priority announcements are required. The call-only output can also be used for 3-wire remote, volume control override.
The mixer amplifier has two zone outputs. The music can be switched on and off in the zones via the front panel and optional wall panel. Announcements from the PLE-2CS two-zone call station can be routed to zone 1 or zone 2, or both. Announcements from the tel/100 V input or inputs 1 & 2 are routed to both zones. Input 1 can be used for a PLE-1CS all-call call station or any other microphone or call station with a PTT contact.
An LED VU meter monitors the master output. A headphone socket, below the VU meter, provides the mixer output before zone selection so that it is possible to listen to the output before the signal is sent to the zone. For total reliability and ease of use, a limiter is integrated into the output stage to restrict output if the user applies too much signal.
|Operating temperature||-10°C to +45°C|
|Loudspeaker output 8 ohm||31V (120W)|
|Loudspeaker output 100V Max / Rated||180W / 120W|
|Emergency / telephone||1|
|Hi Control||Max ±12dB (frequency is setting dependent)|
|Low Control||Max ±12dB (frequency is setting dependent|
|Distortion||<1% @ rated output power, 1 kHz|
|Frequency response||50 Hz to 20 kHz (+1/-3 dB @ -10 dB ref. rated output)|
|Power consumption||400 VA|
|Inrush current||8/16 A (230/115 VAC)|
|Voltage||115 - 230 VAC ±10%, 50/60 Hz|
No customer reviews for the moment.