No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
Bosch 12" 200W Surface Mount Subwoofer 8 Ohm (each)
The EVID-S series includes 4", 5.25" and 8" 2-way models with matching...
Bosch Dual 10" 400W IP Rated Surface Mount Subwoofer 100v / 8 Ohm (each)
The EVID-S series includes 4", 5.25" and 8" 2-way models with matching...
Bosch 8" 90W IP Rated Surface Mount Speaker 100v / 8 Ohm (pair)
The EVID-S series includes 4", 5.25" and 8" 2-way models with matching...
Bosch 8" 90W IP Rated Surface Mount Speaker 8 Ohm (pair)
The EVID-S series includes 4", 5.25" and 8" 2-way models with matching...
Bosch 5" 90W IP Rated Surface Mount Speaker 100v / 8 Ohm (pair)
The EVID-S series includes 4", 5.25" and 8" 2-way models with matching...
Bosch 5" 75W IP Rated Surface Mount Speaker 100v / 8 Ohm (pair)
The EVID-S series includes 4", 5.25" and 8" 2-way models with matching...
Bosch 5" 75W IP Rated Surface Mount Speaker 8 Ohm (pair)
The EVID-S series includes 4", 5.25" and 8" 2-way models with matching...
Bosch 4” 15W IP Rated Surface Mount Speaker 100v (pair)
The EVID-S series includes 4", 5.25" and 8" 2-way models with matching...
Testimonials ( 3 )
06-12-2017
06-10-2015
12-05-2015
Installation Hardware / Masting / Tripods There are 30 products.
TV Antenna Tripod Tile Roof
TV Antenna tripod for tile roofs. Galvanised Steel includes bolts and 1.2m Mast. Designed to be fixed to pitched or flat roofs. Simple screw down and select desired angle and tighten collar bolts to achieve correct incline for vertical installation.
Iron Roof Mount with U Bolt
Iron Roof Mount for TV Antenna mast to suit metal roof ridge cap supplied with U-Bolt. TV Antenna Mount made of galvanised steel for long life.
Stay Bars 4Ft Pair
Galvanised steel stay bars to support your TV Antenna mount or mast. Sold as a pair these 4ft stay bars will provide stability to supporting your TV Aerial mast. When ordering you must remember that you will need extra length for the drop in the pitch of the roof. Commonly installed at an angle to ensure a strong mast for years to come. CANNOT BE SHIPPED...
8ft 2.4m Galvanised Steel Masts
2.4m x 25mm (8ft) Diameter galvanised steel TV antenna mast. TV Aerial bracket pole can be supported by stay bars and stay bar collars. Raising your TV antenna is often the only solution to get over trees or a neighbours house for the TV best reception. CANNOT BE SHIPPED - PICK UP ONLY
Stand Off Bar 100cm
Galvanised Steel 1m long, this stand off bar can be used horizontal or vertical to mount a TV and Radio antenna. Commonly called a 40" wall mount. It has a sturdy base plate and 25mm diameter pipe.
TV Antenna Tripod Metal Roof
Galvanised Steel TV bracket tripod and mast includes bolts and 1.2m Mast for mounting TV Aerial on metal or tin roofs. Designed for pitch roofs and flat roofs, simply screw down and tilt and tighten collar bolts to achieve desired angle.
Stay Bars 6Ft Pair
6Ft Stay Bars for supporting TV Antenna masts and Aerial Poles. Installed at an angle they support the TV Aerial pole from falling over. Can be screwed to roof and fixed to stay bar collar on mast.
Mast Extension
Not enough length? Try our mast extension. 25mm diam x 1520mm. PICK UP ONLY
Stay Bars 8Ft Pair
Sold as a Pair these 8ft 2.4m long TV antenna stay bars are mounted on an angle to support the TV Antenna mast. With screw hole top and bottom they can be fixed to roof line and the TV Aerial mast. CANNOT BE SHIPPED- Pick up only.
Light Angle Roof Mount with U bolt
Galvanised Steel base plate with U-Bolt for mounting TV Antenna masts to roof. Can be used on any roof type including metal and tile. 75mm x 30mm
Hockey Stick 1.5m
TV Antenna mast shaped like a hockey stick, or J bracket. Mounts directly to Facia Board, Galvanised Steel. 1.5m (55inch) 25mm diameter. Mounting plate 220mm x 65mm. Hole size 10mm. CANNOT BE SHIPPED - Pick up only
6Ft 1.8m Galvanised Steel Masts
(6Ft) 1.8m x 25mm diameter galvanised steel TV antenna mast for mounting TV Aerials on. Great for getting that extra height and reach over trees or neighbouring houses. This TV aerial mounting pole can be supported with stay bars and stay bar collar. CANNOT BE SHIPPED - PICK UP ONLY
Tile Roof Ridge Mount with U Bolt
Mounted on the ridge of your roof, supplied with U-bolt it holds your TV Antenna mast upright with supports and stays also available right here. 230mm x 200mm
Wire Rope Grip
Galvanised wire rope grips for TV antenna masting wire. Use to clamp guy wires for TV aerial mast support. Keeps your antenna mast stable and secure.
Collar Bar Stays 32mm
32mm Galvanised Collar Bar Stays. Stay bar collars to fit 32mm antenna masts. Used to connect mast stay bars to the television aerial mast for support. Zinc Plated for extra protection from corrosion.
Guy Wire Rings 32mm
Guy rings are installed over TV Antenna masting and fixed with appropriate collar. These 32mm rings suit most masting and allow for guy wire ropes to secure the TV Aerial mast.
Turnbuckle
Heavy Duty Galvanised steel Turnbuckle For Guyed Masting. Hook and Eye. 8mm (5/16 inch) Threaded Adjustable 170mm to 250mm turnbuckle for tensioning antenna mast support guy wire rope.
U-Bolt bracket
For Clamping To Masts. Use with 'U' Bolt to secure television antennas to masts for secure mounting. Suits mosts antenna masts 25mm - 60mm
Cable Ties 200mm Black 100pk
Cable ties 200 x 4.8mm. Installation with cable ties ensures your cables are secured and kept neat and tidy. Any cable installation for home or commercial application.
Cable Ties 300mm Black 100pk
Cable ties for cable installation. 300mm x 4.8mm. Weather resistant Nylon cable ties that will last. Secure quickly and know that it will do the job outdoors or indoors for years to come.
Stay Bar Collar 25mm
25mm Stay Bar Collar, fits over TV Aerial masts with a 25mm diameter for securing stay bars or guy rings.
Cable Ties 250mm Black 100pk
Cable ties 250 x 3.6mm. Installation with cable ties ensures your cables are secured and kept neat and tidy. Any cable installation for home or commercial application.
Guy Wire Cleats - Each
Galvanised guy wire cleats Pre drilled 40mm x 120mm. Simply screw to the roof and position for easy fixing of turnbuckles to guy wire ropes.
Thimble for Guy Ring 4pc
Galvanised thimbles for ensuring guy wires do not cut into guy rings for long lasting durability.
