Testimonials ( 4 )
07-02-2020
06-12-2017
06-10-2015
12-05-2015
Wall Plates/ Outlets/Sockets/Mechs There are 54 products.
15mm Mounting Block
Slim 15mm mounting block raises your wall plate off the wall by an extra 15mm. Give yourself room to work with this small mounting block.
35mm Mounting Block
Thick 35mm mounting block bulks your wall plate off the wall by 35mm. If your cavity is too shallow, use thick wall plate mounting blocks to give yourself more room to work.
CAT5 RJ45 Joiner
Cat5 Snap coupler for use with Keystone patch panels or Clipsal style wall-plates.
HDMI 90 Degree Insert
This HDMI (Right Angle) terminal / connector suits Clipsal style wall plates. It’s ideal for making up your own custom wall plates to allow HDMI cable connections. Right angle design for cable redirection and eliminates cables from being squashed. Using HDMI wall plates is easy when connecting any of our HDMI 2.0 cables.
Plaster C Clip
Plaster C-Clip bracket for inserting into a cut wall cavity to secure all types of wall plates.
Reverse Bullnose Wallplate
Easily manage your cables with this reverse bullnose wallplate. Keeps cables neat and tidy with large opening to accommodate cables at once. Suitable for Office or Home Theatre Set ups and more.
Wall Plate 3.5mm Stereo Audio Socket with...
Wall plate Insert/mech with a female 3.5mm stereo audio socket front and tail, to suit Clipsal wall plates . Great for connecting leads in small wall cavities where space is essential.
Wall Plate Blank Insert
This wall plate blank insert/mech will fill any unused slots in your wall plates. Suits Clipsal style blank wall plates to give a clean finish to your wall plate.
Wall Plate Brush
Available in colours Black and White. This Brush Wall Plate features a design that is great for a low profile, clean wall finish with allowance to accommodate different leads to be pulled through the wall cavity and connected directly into the output and/or source equipment of any Home Theatre or Home Cinema.
Wall Plate Cat5e RJ45 Insert/Mech
Cat5e Data Wall plate insert/mech to suit any Clipsal style wall plate with an RJ45 connection on the front and a Cat5e or Cat6 punch-down type termination on the rear. Customize your own wall plates from our range of premium sockets. Suitable for data networks. Use the speed termination tool for multiple data connections.
Wall Plate Cat6 RJ45 Insert/Mech
Category 6 Socket Wall plate insert for Clipsal wall plates with an RJ45 connection on the front and a Cat6 Krone type punch-down type termination on the rear. Pre-wiring your house with data cable Cat6, you need Wall plates to finish off. Look no further.
Wall Plate Clipsal Style 10 x Speaker Posts
Connect 5 speakers to our conveniently labelled wall plate.
Wall Plate Clipsal Style 8 x Speaker Posts
Connect 4 speakers to our conveniently labelled wall plate.
Wall Plate Double Gang
Build your own customised wall plate. Double gang blank wall plate suits Clipsal style inserts allowing you to create your own custom wall plate using up to two of the many inserts available on this site.
Wall Plate Dual XLR Female
3pin XLR microphone connector mounted horizontally on a dual face wall plate.
Wall Plate F Type Female to Female Insert
F-Type wall plate insert/mech to suit Clipsal style wall plate with a female Pay TV style F Type connection front and back. F Type wall plate insert suitable for Foxtel outlets and bigpond broadband and digital television. Checkout our blank wall plates and make your own.
Wall Plate F-Type
F-Type wall plate with a single prefabricated (PayTV Style) F-Type female connection inside a wall plate. No modifying required, F-Type connection on the reverse.
Wall Plate F-Type Skirting
Professional F-Type skirting plate allows for you to make a single F-Type (PayTV Style) connection along your skirting board for a clean installation. Suitable for analog or digital TV signals.
Wall Plate Four Gang
A four gang wall plate that suits Clipsal style inserts/Mechs, allowing for creation of your own custom wall plate using up to four of our many inserts available.
Wall Plate HDMI Insert with Tail - V 2.0
Available in colours black and white. This HDMI Wall Plate Insert/Mech suits Clipsal style wall plates with a female HDMI connector front and female HDMI connector tail on rear 150mm long. Great for connecting HDMI leads with flexible tail on rear to bend in any wall cavity.
Wall Plate Kit Component Video and Stereo...
Wall plates simply connect via Cat5e cable. You input and output via RCA lead, and simply plug in the Cat5e at the rear via RJ45 connections. Tested up to 30m to pass 1080i resolution video and 100m for digital audio. No power supplies or other active components required. Slim in design they will fit any wall cavity. (Sold as a pair).
Wall Plate Kit Component Video with...
Component Video with Digital Coaxial Audio Extender Wall Plate Kit uses economic Cat5e cable to extend 1080P video up to 50 meters and 720P video up to 75 meters. Connected at the rear using RJ45 connectors this provides a secure plug and play connection. No power supplies are required and the Clipsal style wall plates are designed to fit any wall cavity....
Wall Plate Kit Composite AV over Cat5e
Composite video with stereo audio extender uses economic CAT5e cable to extend composite video up to 100 meters. Connected on the rear using RJ45 connectors this provides a secure plug and play connection. No power supplies are required and the Clipsal style plates are designed to fit any wall cavity. (Sold as a pair).
Wall Plate Large Bullnose
Bullnose style wall plate lets you easily pull interconnects or leads through a clean finish wall plate look cavity. Great for keeping a clean look to your home theatre without the use of multiple wall plates with different connection types. Clean, simple and cost effective.
