3 Way Ratchet RJ Crimper is a modular crimping tool for RJ45, RJ12, RJ11 connectors. Heavy duty premium all-in-one ratchet crimp tool features a cutter/stripper so no other tools are required. Terminates professionally for LAN, phone, network, Ethernet, router and many other UTP/STP applications.
These clips are essential for tidying up cable runs once you've finished your install. They attach securely via a simple fastener to square any loose cable away against walls, skirting boards etc.
Small network cable cutter and stripper for UTP and STP (Cat5e/6/7) cables is a lightweight compact cable stripper with handy punch-down tool designed for stripping and cutting network cables and leads.
RG59 RG6 Coaxial Connector Crimping Tool designed for crimping RG59 and RG6 size connectors onto coaxial TV cables. Simple and effective for crimping F-Type connectors, IEC (Pal) and BNC.
Krone like punch down tool for terminating data network cables. Terminates cables like Cat5e and Cat6 into sockets, patch panels and outlets. Trims and terminates with one low-impact punch, makes installation of data networks a breeze.
Fitting off a house with hundreds of data terminations? It can be slow punching down wire after wire. With the speed termination tool you can punch down all 8 wires in one go, fitting your wall plate data mech in seconds. Easy to use and fast.
LAN Patch Lead Tester for RJ45 UTP/STP leads. Test Network and Ethernet cables up to 300 metres length. A must for LAN installers or anyone using Cat5, Cat6 cables to test the integrity of your installation.
Every Installers' dream. This 4K HDMI Signal Generator and Display Emulator (Signal Analyser) fits in your top pocket. Perfect for confirming resolutions and HDCP issues. Simply connect to any HDMI input. Select your mode via dip switch and produce a test pattern or HDCP handshake. See Video Below.
The NF-388 is a multipurpose network cable test & check line instrument. The equipment consists of a main tester (NF-308), a receiver (NF-838-R) and the remote identifier (8pcs). It has three mainly functions - line-tracking, line-alignment and line state test.
The PCT F connector tool is a one-of-a-kind connector compression tool designed with the installers’ needs in mind. This tool is compatible with RG6 and RG59 PCT TRS and DRS series F connectors. During compression, the connector is supported 360 degrees for balanced, consistent installations.
Top quality PVC insulation tape. 0.18mm x 18mm x 18m VOLTAGE: 600v TEMPERATURE: -10° - +80° ADHESION:0.34kg/25mm TENSILE STRENGTH:6.6kg/25mm ELONGATION: 200% Flame Retardant
Professional coaxial cable stripper for RG6, 58, 59, 62, 3C2V, 5C2V and more Designed to leave 6mm braid and 6mm exposed conductor. Strip the ends of your coaxial cable RG6 and RG59 for adding connectors. It makes terminating cables so simple. Watch it in use HERE in our training video.
Perfect tool for data and telecommunication installer. Economical, Practical and High Quality tool. Suitable for (Cat 5, Cat5e, Cat6 etc) and 8P8C, 6P6C RJ-45, RJ11,RJ12 plugs connectors.
The HT-352 is a yellow Universal Stripping Tool made of ABS. It is suitable for RG59, RG6, RG7/11, round networking cable, flat telephone cable and flat 4P/6P/8P cable.