No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
New products
PHOENIX UHF TV ANTENNA 4G/5G FILTER 10DB
Made in SPAIN. PHOENIX OUTDOOR UHF ANTENNA. Easy to assemble and no...
Fte Maximal 41 dB Distribution Amplifier IP 40 Rated
Distribution Amplifier IP 40 rated, with 2 VHF and 1 UHF inputs and...
4K 4X4 HDMI HDBaseT MATRIX with 3 RECEIVERS
HDBaseT Matrix with 3 Receivers; 4 HDMI inputs, 1 HDMI output with audio...
2.75" CEILING SPEAKER 70/100V/8 Ohms. PRICED EACH SOLD IN PAIRS.
QSC AC-C2T 2.75" Ceiling Speaker is recommended for enhanced background...
4.5" CEILING SPEAKER 70/100V/8 Ohms. PRICED EACH SOLD IN PAIRS.
QSC AC-C4T 4" Ceiling Speaker is suitable for foreground audio, POTS,...
AC-C4T NO BACK CAN VERSION. PRICED EACH SOLD IN MULTIPLES OF FOUR.
QSC AC-C4T-NB 4" Ceiling Speaker is suitable for foreground audio, POTS,...
6.5" CEILING SPEAKER 70/100V/8 Ohms. PRICED EACH SOLD IN PAIRS.
QSC AC-C6T is a 6" 2-way, ceiling mount speaker that can provide...
8" CEILING SPEAKER. 70/100V/8 Ohms. PRICED EACH SOLD IN PAIRS.
QSC AC-C8T 8" two-way, ceiling speaker produces pristine clarity up to...
Testimonials ( 4 )
07-02-2020
06-12-2017
06-10-2015
12-05-2015
Television There are 82 products.
1 in 4 out Composite Video-Audio...
Composite Video-Audio Distribution Amplifier amplifies Composite or S-Video and Audio to 4 outlet points. Allows splitting of your AV signals to 4 locations without signal loss. Suitable for domestic or commercial applications such as in cafes, restaurants, pubs & clubs, etc. Includes 12Vdc Power Supply.
1 Way Tap 10dB A Class
Pay-TV Approved - 10dB A Class 1-Way Tap suitable for MATV taps in high grade SMATV or MATV systems. Use as Satellite television taps or for those that need the best quality for their TV reception install at home. Use with quality amplifiers and then cut the signal with these A Class Taps in order to receive the correct dB for the outputs.
1 Way Tap 12dB A Class
12dB A-Class 1-Way Tap suitable for high grade SMATV or MATV distribution systems or for those that need the best quality for their reception install at home. High quality digital TV taps featuring plastic click back to allow installation before connecting cables. Simple but effective in designing your MATV/SMATV head-end.
1 Way Tap 15dB A Class
Pay-TV Approved 15dB A-Class 1-Way taps suitable for high grade SMATV or MATV antenna systems or for those that need the best quality television taps for their reception install at home. Plastic click back allows installation before connecting cables. Suited for amplified signal in multi level buildings where pass through is required.
1 Way Tap 20dB A Class
A-Class 20db 1-Way Tap is Pay-TV Approved for high grade SMATV or MATV systems. MATV Signal taps for those that need the best quality for their reception. Plastic click back allows installation before connecting cables. Our digital television taps feature F-Type Connections for fast and secure connectivity and meets Australian standards.
1 Way Tap 25dB A Class
Pay-TV Approved 25dB A-Class 1-Way Taps suitable for high grade SMATV or MATV system design. Digital television taps for those that need the best quality for their reception install at home. Plastic click back allows installation before connecting cables. Simple but effective in designing your MATV/SMATV headend. Ideal for the reception installation where...
1 Way Tap 8dB A Class
Pay-TV Approved 8dB A-Class 1-Way Taps are suitable for high grade SMATV or MATV distribution systems or for those that need top quality reception for their home. Quality MATV taps with plastic click backs allow installation before connecting cables for simple but effective designs for your MATV/SMATV head end.
12Ft 3.6m Galvanised Steel Masts
(12ft) 3.6m x 32mm Diameter Galvanised Steel mast for digital radio and TV aerial mounting. Ideal for poor reception areas where signal is hindered by hills or trees. Raise the antenna for clearer signal reception. CANNOT BE SHIPPED -PICK UP ONLY
14VDC Power Supply with Injector F Type
14VDC Power Supply with Coax Injector. F Type connector. LED light to confirm power. Commonly called a TV booster, although this is technically incorrect. The power supply sends voltage up to the TV Booster/Masthead amplifier on the roof. Thus the name and conception a TV booster. The voltage powers up the masthead amplifier therefore boosting/amplifying...
14VDC Power Supply with Injector PAL Type
14VDC Power Supply with Coax Injector. PAL Type connector. Commonly called a TV booster, although this is technically incorrect. The power supply sends voltage up to the TV Booster/Masthead amplifier on the roof. Thus the name and conception a TV booster. The voltage powers up the masthead amplifier therefore boosting/amplifying your signal.
15Ft 5m Galvanised Steel Masts
(15ft) 5m x 32mm diameter galvanised steel mast. If your house is low and the TV antenna is behind trees or a neighbouring house, or below a mountain line. Lifting your antenna up is often the only solution for getting the best TV signal. This mast can be supported with guy wires and turnbuckles. CANNOT BE SHIPPED -PICK UP ONLY
17VAC Power Supply with Injector PAL Type
17VAC Power Supply with Coax Injector. PAL Type connector. Commonly called a TV booster, although this is technically incorrect. The power supply sends voltage up to the TV Booster/Masthead amplifier on the roof. Thus the name and conception a TV booster. The voltage powers up the masthead amplifier therefore boosting/amplifying your signal.
2 Way Tap 10dB A Class
Pay-TV Approved A-Class 2-Way Tap suitable for high grade SMATV or MATV systems. High quality TV taps for those that need the best for their reception install at home. MATV distribution taps featuring plastic click backs to allow installation before connecting cables. Suited for amplified signal in multi level buildings where pass through is required.
2 Way Tap 12dB A Class
12dB A-Class 2-Way Tap suitable for high grade SMATV or MATV systems and quality domestic installations. For those that want the best quality for their TV reception at home, our digital TV taps and splitters feature F-Type connections for fast and secure connectivity and meet Australian standards.
2 Way Tap 15dB A Class
A Class 15dB 2 Way Tap, suitable for high grade SMATV or MATV system designs or for those that need the best quality reception install at home. Pay TV approved taps with F-Type connections for fast and secure connectivity and meets Australian standards. Plastic click back allows installation before connecting cables. Simple but effective in designing your...
2 Way Tap 20dB A Class
20dB A-Class 2-Way Taps suitable for high grade SMATV or MATV systems. Plastic click back allows installation before connecting cables. Simple but effective in designing your MATV/SMATV headend. Digital Television taps featuring F-Type Connections for fast and secure connectivity and meet Australian standards. Perfect solution for those that need the best...
2 Way Tap 25dB A Class
25dB A Class 2 Way Tap suitable for high grade SMATV or MATV systems. MATV taps allow you to balance MATV signal levels. Use only Pay TV approved taps and splitters in your television distribution system. Simple but effective in designing your MATV/SMATV head-end. Ideal for the reception installation where quality is required.
2 Way Tap 30dB A Class
30dB A Class 2 Way Tap suitable for high grade SMATV or MATV systems. PayTV Approved Taps are essential for Foxtel distribution or for those requiring the best quality for their television reception. Ideal for the installation where quality is required. Our MATV distribution taps have F-Type connections for fast and secure connectivity and meet Australian...
2 Way TV Splitter
2 Way TV Splitter, Digital Antenna Splitters for the best quality television reception in the home. Split TV antenna cables to different locations. DIY TV antenna installation is easy with the right TV splitters.
2 Way TV Splitter A Class
A-Class 2 Way TV Splitters have a High Interference Rejection. Digital TV Splitters are suitable for High grade SMATV/MATV systems or for those that want the best at home. Great value Television splitters! Plastic click back allows easy installation before connecting cables. Simple but effective in designing your MATV/SMATV head-end.
24VDC Power Supply with Injector PAL Type
24VDC Power Supply with Coax Injector. PAL Type connector. With LED light to confirm accurate power. Commonly called a TV booster, although this is technically incorrect. The power supply sends voltage up to the TV Booster/Masthead amplifier on the roof. Thus the name and conception a TV booster. The voltage powers up the masthead amplifier therefore...
3 Way TV Splitter
3 Way TV Splitter with AC/DC Power Pass on one port, Digital Antenna splitter for splitting terrestrial television signals to 3 outlets. Digital Life DTV splitters are great for DIY TV antenna installations. Reduce TV antenna problems with Digital Life TV splitters.
3 Way TV Splitter A Class
3 Way TV Splitter for splitting TV antenna signals. A-Class Digital antenna splitters have a High Interference Rejection of 100dBuv. Suitable for High grade SMATV/MATV systems or for those that want the best at home. Great value Foxtel cable splitter for the TV antenna reception installation where quality is required.
4 Way Tap 12dB A Class
Pay-TV Approved 12dB A Class 4 Way Tap is suitable for high grade SMATV or MATV systems. MATV Taps with a plastic click back allows installation before connecting cables. Digital Television Signal Taps ideal for the reception installation where quality is required. F-Type Connections for fast and secure connectivity and meets Australian standards.
